Pete's Packet

Limitless

%BGP-3-NOTIFICATION: received from neighbor 183.1.17.1 2/2 (peer in wrong AS) 2 bytes 0064

Posted by Peter Kurdziel on November 7, 2008

*Mar  1 03:25:26.251: BGP: 183.1.17.7 bad OPEN, remote AS is 100, expected 200
*Mar  1 03:25:26.251: BGP: 183.1.17.7 went from OpenSent to Closing
*Mar  1 03:25:26.251: %BGP-3-NOTIFICATION: sent to neighbor 183.1.17.7 2/2 (peer in wrong AS) 2 bytes 0064 FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF 002D 0104 0064 00B4 9601 0707 1002 0601 0400 0100 0102 0280 0002 0202 00
*Mar  1 03:25:26.255: BGP: 183.1.17.7 send message type 3, length (incl. header) 23
*Mar  1 03:25:26.363: BGP: 183.1.17.7 local error close after sending NOTIFICATION
*Mar  1 03:25:26.367: BGPNSF state: 183.1.17.7 w
Rack1R1#ent from nsf_not_active to nsf_not_active
*Mar  1 03:25:26.367: BGP: 183.1.17.7 went from Closing to Idle
*Mar  1 03:25:26.367: BGP: 183.1.17.7 closing
*Mar  1 03:25:27.383: BGP: 183.1.17.7 went from Idle to Active
*Mar  1 03:25:27.395: BGP: 183.1.17.7 open active delayed 27694ms (35000ms max, 28% jitter)
Rack1R1#
*Mar  1 03:25:55.091: BGP: 183.1.17.7 open active, local address 183.1.17.1
*Mar  1 03:25:55.275: BGP: 183.1.17.7 went from Active to OpenSent


TYPO WAS CORRECTED

*Mar  1 03:25:55.279: BGP: 183.1.17.7 sending OPEN, version 4, my as: 200, holdtime 180 seconds
*Mar  1 03:25:55.287: BGP: 183.1.17.7 send message type 1, length (incl. header) 45
*Mar  1 03:25:55.355: BGP: 183.1.17.7 rcv message type 1, length (excl. header) 26
*Mar  1 03:25:55.359: BGP: 183.1.17.7 rcv OPEN, version 4, holdtime 180 seconds
*Mar  1 03:25:55.359: BGP: 183.1.17.7 rcv OPEN w/ OPTION parameter len: 16
*Mar  1 03:25:55.363: BGP: 183.1.17.7 rcvd OPEN w/ optional parameter type 2 (Capability) len 6
*Mar  1 03:25:55.363: BGP: 183.1.17.7 OPEN has CAPABILITY code: 1, length 4
*Mar  1 03:25:55.367: BGP: 183.1.17.7 OPEN has MP_EXT CAP for afi/safi: 1/1
*Mar  1 03:25:55.367: BGP: 183.1.17.7 rcvd OPEN w/ optional parameter type 2 (Capability) len 2
*Mar  1 03:25:55.367: BGP: 183.1.17.7 OPEN has CAPABILITY code: 128, length 0
*M
Rack1R1#ar  1 03:25:55.367: BGP: 183.1.17.7 OPEN has ROUTE-REFRESH capability(old) for all address-families
*Mar  1 03:25:55.367: BGP: 183.1.17.7 rcvd OPEN w/ optional parameter type 2 (Capability) len 2
*Mar  1 03:25:55.367: BGP: 183.1.17.7 OPEN has CAPABILITY code: 2, length 0
*Mar  1 03:25:55.367: BGP: 183.1.17.7 OPEN has ROUTE-REFRESH capability(new) for all address-families
BGP: 183.1.17.7 rcvd OPEN w/ remote AS 200
*Mar  1 03:25:55.367: BGP: 183.1.17.7 went from OpenSent to OpenConfirm
*Mar  1 03:25:55.367: BGP: 183.1.17.7 went from OpenConfirm to Established
*Mar  1 03:25:55.367: %BGP-5-ADJCHANGE: neighbor 183.1.17.7 Up

Solution: typo on switch.
This is some good stuff here showing the BGP message states. (see the bold)

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Connecting to %s

 
Follow

Get every new post delivered to your Inbox.