Oh no the switch crashed… Unexpected exception to CPUvector 1100
Posted by Peter Kurdziel on July 7, 2009
SW4(config-if)#interface Vlan10
SW4(config-if)#no ip pim sparse-mode
SW4
Unexpected exception to CPUvector 1100, PC = 535BF4
-Traceback= 535BF4 536C54 537E40 538DF8 441D24 4382CC
=== Flushing messages (15:45:51 UTC Tue Mar 2 1993) ===
Buffered messages:
protocol on Interface FastEthernet0/21, changed state to down
00:05:36: %LINK-3-UPDOWN: Interface FastEthernet0/19, changed state to down
00:05:36: %LINK-3-UPDOWN: Interface FastEthernet0/20, changed state to down
00:05:36: %LINK-3-UPDOWN: Interface FastEthernet0/21, changed state to down
00:06:09: %LINK-3-UPDOWN: Interface FastEthernet0/20, changed state to up
00:06:09: %LINK-3-UPDOWN: Interface FastEthernet0/19, changed state to up
00:06:09: %LINK-3-UPDOWN: Interface FastEthernet0/21, changed state to up
00:06:12: %LINK-3-UPDOWN: Interface FastEthernet0/19, changed state to down
00:06:12: %LINK-3-UPDOWN: Interface FastEthernet0/20, changed state to down
00:06:12: %LINK-3-UPDOWN: Interface FastEthernet0/21, changed state to down
00:06:14: %LINK-3-UPDOWN: Interface FastEthernet0/19, changed state to up
00:06:14: %LINK-3-UPDOWN: Interface FastEthernet0/21, changed state to up
00:06:14: %LINK-3-UPDOWN: Interface FastEthernet0/20, changed state to up
00:06:16: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/19, changed state to up
00:06:16: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/21, changed state to up
00:06:16: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/20, changed state to up
00:13:52: %LINK-3-UPDOWN: Interface FastEthernet0/4, changed state to up
00:13:54: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/4, changed state to up
00:16:29: %DTP-5-DOMAINMISMATCH: Unable to perform trunk negotiation on port Fa0/13 because of VTP domain mismatch.
00:16:29: %DTP-5-DOMAINMISMATCH: Unable to perform trunk negotiation on port Fa0/14 because of VTP domain mismatch.
00:16:29: %DTP-5-DOMAINMISMATCH: Unable to perform trunk negotiation on port Fa0/15 because of VTP domain mismatch.
00:17:09: %DTP-5-DOMAINMISMATCH: Unable to perform trunk negotiation on port Fa0/16 because of VTP domain mismatch.
00:17:09: %DTP-5-DOMAINMISMATCH: Unable to perform trunk negotiation on port Fa0/17 because of VTP domain mismatch.
00:17:09: %DTP-5-DOMAINMISMATCH: Unable to perform trunk negotiation on port Fa0/18 because of VTP domain mismatch.
00:17:10: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/16, changed state to down
00:17:10: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/17, changed state to down
00:17:14: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/17, changed state to up
00:17:14: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/16, changed state to up
00:18:04: %LINK-5-CHANGED: Interface Vlan1, changed state to administratively down
00:18:05: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
00:18:15: %DTP-5-DOMAINMISMATCH: Unable to perform trunk negotiation on port Fa0/19 because of VTP domain mismatch.
00:18:15: %DTP-5-DOMAINMISMATCH: Unable to perform trunk negotiation on port Fa0/21 because of VTP domain mismatch.
00:18:15: %DTP-5-DOMAINMISMATCH: Unable to perform trunk negotiation on port Fa0/20 because of VTP domain mismatch.
00:18:32: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan10, changed state to down
00:18:33: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback0, changed state to up
00:18:33: %LINK-3-UPDOWN: Interface FastEthernet0/16, changed state to up
00:18:33: %LINK-3-UPDOWN: Interface FastEthernet0/17, changed state to up
00:18:34: %SYS-5-CONFIG_I: Configured from console by console
00:18:34: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor 155.1.108.8 (Port-channel1) is up: new adjacency
00:18:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/16, changed state to up
00:18:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/17, changed state to up
00:18:35: %LINK-3-UPDOWN: Interface Port-channel1, changed state to up
00:18:36: %LINEPROTO-5-UPDOWN: Line protocol on Interface Port-channel1, changed state to up
00:19:01: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan10, changed state to up
1d02h: %SYS-5-CONFIG_I: Configured from console by console
1d15h: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan20, changed state to down
Queued messages:
Cisco IOS Software, C3550 Software (C3550-IPSERVICESK9-M), Version 12.2(25)SEE4, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Mon 16-Jul-07 03:03 by myl
Data Load Translation Miss Exception (0×1100)!
CPU Register Context:
Vector = 0×00001100 PC = 0×00535BF4 MSR = 0×4008B030 CR = 0×40000044
LR = 0×00536C54 CTR = 0×00537E04 XER = 0×00000000
R0 = 0×00000000 R1 = 0×01C660E0 R2 = 0×00000000 R3 = 0×0154BF70
R4 = 0×00000003 R5 = 0xFEC0FEC0 R6 = 0xFEE00000 R7 = 0×0154BF70
R8 = 0×0154BF74 R9 = 0×02182228 R10 = 0×00000000 R11 = 0×00000000
R12 = 0×088851A4 R13 = 0×06D0A240 R14 = 0×00538D3C R15 = 0×00000000
R16 = 0×00000000 R17 = 0×00000000 R18 = 0×00000000 R19 = 0×00000000
R20 = 0×00000000 R21 = 0×00000000 R22 = 0×00000000 R23 = 0×00000000
R24 = 0×00000000 R25 = 0×00000003 R26 = 0×00000000 R27 = 0×00000000
R28 = 0×00000000 R29 = 0×0154BF50 R30 = 0×0D0D0D0D R31 = 0×0154BF70
Stack trace:
PC = 0×00535BF4, SP = 0×01C660E0
Frame 00: SP = 0×01C66108 PC = 0×00000000
Frame 01: SP = 0×01C66118 PC = 0×00536C54
Frame 02: SP = 0×01C66358 PC = 0×00537E40
Frame 03: SP = 0×01C66380 PC = 0×00538DF8
Frame 04: SP = 0×01C66388 PC = 0×00441D24
Frame 05: SP = 0×00000000 PC = 0×004382CC
Base ethernet MAC Address: 00:0b:be:bb:1f:00
Xmodem file system is available.
The password-recovery mechanism is enabled.
Initializing Flash…
flashfs[0]: 6 files, 1 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
flashfs[0]: Bytes used: 7151616
flashfs[0]: Bytes available: 8847360
flashfs[0]: flashfs fsck took 22 seconds.
…done Initializing Flash.
Boot Sector Filesystem (bs:) installed, fsid: 3
Loading “flash:/c3550-ipservicesk9-mz.122-25.SEE4.bin”…##############################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################
File “flash:/c3550-ipservicesk9-mz.122-25.SEE4.bin” uncompressed and installed, entry point: 0×3000
executing…
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software – Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C3550 Software (C3550-IPSERVICESK9-M), Version 12.2(25)SEE4, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Mon 16-Jul-07 03:03 by myl
Image text-base: 0×00003000, data-base: 0×00DC4EBC
Initializing flashfs…
flashfs[1]: 6 files, 1 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 15998976
flashfs[1]: Bytes used: 7151616
flashfs[1]: Bytes available: 8847360
flashfs[1]: flashfs fsck took 8 seconds.
flashfs[1]: Initialization complete.
…done Initializing flashfs.
POST: CPU Buffer Tests : Begin
POST: CPU Buffer Tests : End, Status Passed
POST: CPU Interface Tests : Begin
POST: CPU Interface Tests : End, Status Passed
POST: Switch Core Tests : Begin
POST: Switch Core Tests : End, Status Passed
POST: CPU Interface 2nd Stage Tests : Begin
POST: CPU Interface 2nd Stage Tests : End, Status Passed
POST: CAM Subsystem Tests : Begin
POST: CAM Subsystem Tests : End, Status Passed
POST: Ethernet Controller Tests : Begin
POST: Ethernet Controller Tests : End, Status Passed
POST: ILP Controller Tests : Begin
POST: ILP Controller Tests : End, Status Passed
POST: Loopback Tests : Begin
POST: Loopback Tests : End, Status Passed
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Cisco WS-C3550-24-PWR (PowerPC) processor (revision A0) with 65526K/8192K bytes of memory.
Processor board ID CHK0652V1EK
Last reset from warm-reset
Running Layer2/3 Switching Image
Ethernet-controller 1 has 12 Fast Ethernet/IEEE 802.3 interfaces
Ethernet-controller 2 has 12 Fast Ethernet/IEEE 802.3 interfaces
Ethernet-controller 3 has 1 Gigabit Ethernet/IEEE 802.3 interface
Ethernet-controller 4 has 1 Gigabit Ethernet/IEEE 802.3 interface
24 FastEthernet interfaces
2 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
384K bytes of flash-simulated NVRAM.
Base ethernet MAC Address: 00:0B:BE:BB:1F:00
Motherboard assembly number: 73-8100-05
Power supply part number: 341-0029-01
Motherboard serial number: CAT06510604
Power supply serial number: LIT0651059J
Model revision number: A0
Motherboard revision number: A0
Model number: WS-C3550-24PWR-SMI
System serial number: CHK0652V1EKFailed to generate persistent self-signed certificate.
Secure server will use temporary self-signed certificate.
Press RETURN to get started!
00:00:37: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
00:00:39: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
00:00:40: %SYS-5-CONFIG_I: Configured from memory by console
00:00:40: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback0, changed state to up
00:00:41: %SYS-5-RESTART: System restarted –
Cisco IOS Software, C3550 Software (C3550-IPSERVICESK9-M), Version 12.2(25)SEE4, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Mon 16-Jul-07 03:03 by myl
00:00:41: %LINK-5-CHANGED: Interface Vlan1, changed state to administratively down
00:00:43: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor 155.1.108.8 (Port-channel1) is up: new adjacency
00:00:43: %LINK-3-UPDOWN: Interface FastEthernet0/16, changed state to up
00:00:43: %LINK-3-UPDOWN: Interface Port-channel1, changed state to up
00:00:43: %LINK-3-UPDOWN: Interface FastEthernet0/17, changed state to up
00:00:43: %LINK-3-UPDOWN: Interface FastEthernet0/4, changed state to up
00:00:43: %LINK-3-UPDOWN: Interface FastEthernet0/13, changed state to up
00:00:43: %LINK-3-UPDOWN: Interface FastEthernet0/14, changed state to up
00:00:43: %LINK-3-UPDOWN: Interface FastEthernet0/15, changed state to up
00:00:43: %LINK-3-UPDOWN: Interface FastEthernet0/18, changed state to up
00:00:43: %LINK-3-UPDOWN: Interface FastEthernet0/19, changed state to up
00:00:43: %LINK-3-UPDOWN: Interface FastEthernet0/20, changed state to up
00:00:43: %LINK-3-UPDOWN: Interface FastEthernet0/21, changed state to up
00:00:44: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/16, changed state to up
00:00:44: %LINEPROTO-5-UPDOWN: Line protocol on Interface Port-channel1, changed state to up
00:00:44: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/17, changed state to up
00:00:44: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/4, changed state to down
00:00:44: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/13, changed state to down
00:00:44: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/14, changed state to down
00:00:44: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/15, changed state to down
00:00:44: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/18, changed state to down
00:00:44: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/19, changed state to down
00:00:44: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/20, changed state to down
00:00:45: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/16, changed state to down
00:00:45: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/17, changed state to down
00:00:45: %LINEPROTO-5-UPDOWN: Line protocol on Interface Port-channel1, changed state to down
00:00:46: %LINK-3-UPDOWN: Interface FastEthernet0/19, changed state to down
00:00:46: %LINK-3-UPDOWN: Interface FastEthernet0/20, changed state to down
00:00:46: %LINK-3-UPDOWN: Interface FastEthernet0/21, changed state to down
00:00:47: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/4, changed state to up
00:00:47: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/16, changed state to up
00:00:47: %LINEPROTO-5-UPDOWN: Line protocol on Interface Port-channel1, changed state to up
00:00:47: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/17, changed state to up
00:00:49: %LINK-3-UPDOWN: Interface FastEthernet0/20, changed state to up
00:00:49: %LINK-3-UPDOWN: Interface FastEthernet0/21, changed state to up
00:00:49: %LINK-3-UPDOWN: Interface FastEthernet0/19, changed state to up
00:00:50: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/18, changed state to up
00:00:50: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/13, changed state to up
00:00:50: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/14, changed state to up
00:00:50: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/15, changed state to up
00:00:51: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/20, changed state to up
00:00:51: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/21, changed state to up
00:00:51: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/19, changed state to up
00:01:20: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan10, changed state to up
00:01:41: %PLATFORM_CAT3550-1-CRASHED: System previously crashed with the following message:
00:01:41: %PLATFORM_CAT3550-1-CRASHED: Cisco IOS Software, C3550 Software (C3550-IPSERVICESK9-M), Version 12.2(25)SEE4, RELEASE SOFTWARE (fc1)
00:01:41: %PLATFORM_CAT3550-1-CRASHED: Copyright (c) 1986-2007 by Cisco Systems, Inc.
00:01:41: %PLATFORM_CAT3550-1-CRASHED: Compiled Mon 16-Jul-07 03:03 by myl
00:01:41: %PLATFORM_CAT3550-1-CRASHED:
00:01:41: %PLATFORM_CAT3550-1-CRASHED: Data Load Translation Miss Exception (0×1100)!
00:01:41: %PLATFORM_CAT3550-1-CRASHED: CPU Register Context:
00:01:41: %PLATFORM_CAT3550-1-CRASHED: Vector = 0×00001100 PC = 0×00535BF4 MSR = 0×4008B030 CR = 0×40000044
00:01:41: %PLATFORM_CAT3550-1-CRASHED: LR = 0×00536C54 CTR = 0×00537E04 XER = 0×00000000
00:01:41: %PLATFORM_CAT3550-1-CRASHED: R0 = 0×00000000 R1 = 0×01C660E0 R2 = 0×00000000 R3 = 0×0154BF70
00:01:41: %PLATFORM_CAT3550-1-CRASHED: R4 = 0×00000003 R5 = 0xFEC0FEC0 R6 = 0xFEE00000 R7 = 0×0154BF70
00:01:41: %PLATFORM_CAT3550-1-CRASHED: R8 = 0×0154BF74 R9 = 0×02182228 R10 = 0×00000000 R11 = 0×00000000
00:01:41: %PLATFORM_CAT3550-1-CRASHED: R12 = 0×088851A4 R13 = 0×06D0A240 R14 = 0×00538D3C R15 = 0×00000000
00:01:41: %PLATFORM_CAT3550-1-CRASHED: R16 = 0×00000000 R17 = 0×00000000 R18 = 0×00000000 R19 = 0×00000000
00:01:41: %PLATFORM_CAT3550-1-CRASHED: R20 = 0×00000000 R21 = 0×00000000 R22 = 0×00000000 R23 = 0×00000000
00:01:41: %PLATFORM_CAT3550-1-CRASHED: R24 = 0×00000000 R25 = 0×00000003 R26 = 0×00000000 R27 = 0×00000000
00:01:41: %PLATFORM_CAT3550-1-CRASHED: R28 = 0×00000000 R29 = 0×0154BF50 R30 = 0×0D0D0D0D R31 = 0×0154BF70
00:01:41: %PLATFORM_CAT3550-1-CRASHED:
00:01:41: %PLATFORM_CAT3550-1-CRASHED: Stack trace:
00:01:41: %PLATFORM_CAT3550-1-CRASHED: PC = 0×00535BF4, SP = 0×01C660E0
00:01:41: %PLATFORM_CAT3550-1-CRASHED: Frame 00: SP = 0×01C66108 PC = 0×00000000
00:01:41: %PLATFORM_CAT3550-1-CRASHED: Frame 01: SP = 0×01C66118 PC = 0×00536C54
00:01:41: %PLATFORM_CAT3550-1-CRASHED: Frame 02: SP = 0×01C66358 PC = 0×00537E40
00:01:41: %PLATFORM_CAT3550-1-CRASHED: Frame 03: SP = 0×01C66380 PC = 0×00538DF8
00:01:41: %PLATFORM_CAT3550-1-CRASHED: Frame 04: SP = 0×01C66388 PC = 0×00441D24
00:01:41: %PLATFORM_CAT3550-1-CRASHED: Frame 05: SP = 0×00000000 PC = 0×004382CC
00:01:41: %PLATFORM_CAT3550-1-CRASHED:
After the switch rebooted everything seems fine.
I checked cisco.com’s bug tracker and this IOS is pretty buggy.
