By: Sameh

Sameh — Wed, 24 Nov 2010 12:18:28 +0000

i have same problem with Access point AIR 1252G-E-K9 and keep rebooting as shown …

03:00:09 KWT Fri Mar 1 2002: Unexpected exception to CPUvector 300, PC = 0x23329C , LR = 0×230488

-Traceback= 0x23329C 0×230488 0×230540 0x4A7C48 0x4A3508 0xA2C4C 0xBE84C 0xBEB8C 0x2FEAC8 0x2F916C 0x2F1AD0 0x2FB1E8 0x700A0 0x5A49C 0x1CEDB0 0x1D0B34

CPU Register Context:
MSR = 0×00009030 CR = 0×44442042 CTR = 0x0022FED8 XER = 0×20000000
R0 = 0×00000008 R1 = 0x014E3790 R2 = 0×00000000 R3 = 0x01850E3C
R4 = 0x01850E3C R5 = 0×01679330 R6 = 0×00000000 R7 = 0×01937310
R8 = 0x014E37F0 R9 = 0×00000000 R10 = 0×00000000 R11 = 0x0022FED8
R12 = 0×44442042 R13 = 0xBFE1E7F2 R14 = 0×00000001 R15 = 0×00000005
R16 = 0xFFFFFFFF R17 = 0×00000000 R18 = 0×00000000 R19 = 0×00000000
R20 = 0x012C0000 R21 = 0x012C0000 R22 = 0x014E37B0 R23 = 0×00000000
R24 = 0x014E37F0 R25 = 0×00000000 R26 = 0x0199AF3C R27 = 0x019D54F8
R28 = 0×01937310 R29 = 0x01850E3C R30 = 0×01679330 R31 = 0×00060000

Writing crashinfo to flash:crashinfo_20020301-000009

=== Flushing messages (03:00:09 KWT Fri Mar 1 2002) ===

Buffered messages:
Queued messages:
*Mar 1 03:00:09 KWT: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.

*Mar 1 00:00:06.143: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
*Mar 1 00:00:06.919: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0
*Mar 1 00:00:08 UTC: %AAAA-4-SERVUNDEF: The server-group “rad_acct” is not defined. Please define it.
*Mar 1 03:00:08 KWT: %SYS-6-CLOCKUPDATE: System clock has been updated from 00:00:08 UTC Fri Mar 1 2002 to 03:00:08 KWT Fri Mar 1 2002, configured from console by console.
*Mar 1 03:00:09 KWT: %LINK-3-UPDOWN: Interface GigabitEthernet0, changed state to up
Nested exception_rom_monitor call (2 times)

Unexpected exception to CPUvector 300, PC = 23329C
-Traceback= 0x23329C 0×230488 0×230540 0x4A7C48 0x4A3508 0xA2C4C 0xBE84C 0xBEB8C 0x2FEAC8 0x2F916C 0x2F1AD0 0x2FB1E8 0x700A0 0x5A49C 0x1CEDB0 0x1D0B34

Exception (300)! Data Access

SRR0 = 0×00314294 SRR1 = 0×00001030 SRR2 = 0x0000FFC0 SRR3 = 0x0000FFC0CPU Register Context:
Vector = 0×00000300 PC = 0x0023329C MSR = 0×00009030 CR = 0×44442042
LR = 0×00230488 CTR = 0x0022FED8 XER = 0×20000000
R0 = 0×00000008 R1 = 0x014E3790 R2 = 0×00000000 R3 = 0x01850E3C
R4 = 0x01850E3C R5 = 0×01679330 R6 = 0×00000000 R7 = 0×01937310
R8 = 0x014E37F0 R9 = 0×00000000 R10 = 0×00000000 R11 = 0x0022FED8
R12 = 0×44442042 R13 = 0xBFE1E7F2 R14 = 0×00000001 R15 = 0×00000005
R16 = 0xFFFFFFFF R17 = 0×00000000 R18 = 0×00000000 R19 = 0×00000000
R20 = 0x012C0000 R21 = 0x012C0000 R22 = 0x014E37B0 R23 = 0×00000000
R24 = 0x014E37F0 R25 = 0×00000000 R26 = 0x0199AF3C R27 = 0x019D54F8
R28 = 0×01937310 R29 = 0x01850E3C R30 = 0×01679330 R31 = 0×00060000

Stack trace:
PC = 0x0023329C, SP = 0x014E3790
Frame 00: SP = 0x014E37A8 PC = 0x019D54F8
Frame 01: SP = 0x014E37E0 PC = 0×00230488
Frame 02: SP = 0x014E3830 PC = 0×00230540
Frame 03: SP = 0x014E3868 PC = 0x004A7C48
Frame 04: SP = 0x014E38B0 PC = 0x004A3508
Frame 05: SP = 0x014E3A10 PC = 0x000A2C4C
Frame 06: SP = 0x014E3A48 PC = 0x000BE84C
Frame 07: SP = 0x014E3A78 PC = 0x000BEB8C
Frame 08: SP = 0x014E3A90 PC = 0x002FEAC8
Frame 09: SP = 0x014E3AB8 PC = 0x002F916C
Frame 10: SP = 0x014E3AD8 PC = 0x002F1AD0
Frame 11: SP = 0x014E3B98 PC = 0x002FB1E8
Frame 12: SP = 0x014E3BE8 PC = 0x000700A0
Frame 13: SP = 0x014E3CF8 PC = 0x0005A49C
Frame 14: SP = 0x014E3D00 PC = 0x001CEDB0
Frame 15: SP = 0×00000000 PC = 0x001D0B34

Cisco IOS Software, C1250 Software (C1250-K9W7-M), Version 12.4(10b)JDA3, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Sun 07-Jun-09 03:50 by prod_rel_team

B1-IT-AP1 uptime is 9 seconds

cisco AIR-AP1252G-E-K9 (PowerPC 8349) processor (revision C0) with 49142K/16384K bytes of memory.
Processor board ID FCZ1405P0FZ
PowerPC 8349 CPU at 533Mhz, revision number 0×0031

IOS Bootloader – Starting system.

Xmodem file system is available.

flashfs[0]: 152 files, 7 directories

flashfs[0]: 0 orphaned files, 0 orphaned directories

flashfs[0]: Total bytes: 31868928

flashfs[0]: Bytes used: 6908928

flashfs[0]: Bytes available: 24960000

flashfs[0]: flashfs fsck took 17 seconds.

Reading cookie from flash parameter block…done.

Base Ethernet MAC address: 88:43:e1:28:62:e0

Loading “flash:/c1250-k9w7-mx.124-10b.JDA3/c1250-k9w7-mx.124-10b.JDA3″…##################################################################################################################################################################################################################

File “flash:/c1250-k9w7-mx.124-10b.JDA3/c1250-k9w7-mx.124-10b.JDA3″ uncompressed and installed, entry point: 0×3000

executing…

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software – Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

Initializing flashfs…

flashfs[1]: 152 files, 7 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 31868928
flashfs[1]: Bytes used: 6908928
flashfs[1]: Bytes available: 24960000
flashfs[1]: flashfs fsck took 4 seconds.
flashfs[1]: Initialization complete….done Initializing flashfs.

Warning: the compile-time code checksum does not appear to be present.
Radio 1 A600 8000 0 0 A8030000 30
Radio 0 0 0 0 0 0 13
tx_paks 1421
tx_paks 100

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco AIR-AP1252G-E-K9 (PowerPC 8349) processor (revision C0) with 49142K/16384K bytes of memory.
Processor board ID FCZ1405P0FZ
PowerPC 8349 CPU at 533Mhz, revision number 0×0031
Last reset from power-on
1 Gigabit Ethernet interface
1 802.11 Radio(s)

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 88:43:E1:28:62:E0
Part Number : 73-10425-06
PCA Assembly Number : 800-27630-06
PCA Revision Number : B0
PCB Serial Number : FOC14033JG1
Top Assembly Part Number : 800-29528-03
Top Assembly Serial Number : FCZ1405P0FZ
Top Revision Number : A0
Product/Model Number : AIR-AP1252G-E-K9

03:00:09 KWT Fri Mar 1 2002: Unexpected exception to CPUvector 300, PC = 0x23329C , LR = 0×230488

-Traceback= 0x23329C 0×230488 0×230540 0x4A7C48 0x4A3508 0xA2C4C 0xBE84C 0xBEB8C 0x2FEAC8 0x2F916C 0x2F1AD0 0x2FB1E8 0x700A0 0x5A49C 0x1CEDB0 0x1D0B34

Comments on: Oh no the switch crashed… Unexpected exception to CPUvector 1100

By: Sameh